relase Bouquet 1.5 x32,x64,pop64(SSE4.2)
Moderator: Ras
-
tmokonen
- Posts: 1367
- Joined: Sun Mar 12, 2006 6:46 pm
- Location: Kelowna
- Full name: Tony Mokonen
Re: relase Bouquet 1.5 x32,x64,pop64(SSE4.2)
Hi Jose. I had a crashing problem with the 32 bit version, even with the DLLs. When I launched the MS debugger, it told me illegal instruction, pointing to a POPCNT instruction, which is not supported by my CPU. The 64 bit version correctly detected that I had a non-POPCNT CPU, and ran fine. I am not sure why the 32 bit version didn't detect this.
-
Graham Banks
- Posts: 46350
- Joined: Sun Feb 26, 2006 10:52 am
- Location: Auckland, NZ
Re: relase Bouquet 1.5 x32,x64,pop64(SSE4.2)
Same here. Bouquet 1.4 32-bit is fine though.tmokonen wrote:Hi Jose. I had a crashing problem with the 32 bit version, even with the DLL.
gbanksnz at gmail.com
-
velmarin
- Posts: 1600
- Joined: Mon Feb 21, 2011 9:48 am
Re: relase Bouquet 1.5 x32,x64,pop64(SSE4.2)
The only change has been in the compiler, the Version 12.1 a Version 13.
I will check immediately.
I have no 32-bit machine, so I try it on a Windows XP Virtual_Box 32bit.
Sorry for inconvenience.
I will check immediately.
I have no 32-bit machine, so I try it on a Windows XP Virtual_Box 32bit.
Sorry for inconvenience.
-
geots
- Posts: 4790
- Joined: Sat Mar 11, 2006 12:42 am
Re: Tom Glenn- please read- this thread is for you!!
WuShock wrote:OK George , I'm on it .....
Here's a partial result from another run ......
i7-940 @ 2.93 , 2 threads ea , klo_openings , no egtb , ponder off
Time Control : 1 min + 1 sec
[/img]
I bet it ends up approx Rybka strength , or slightly better , but maybe a little less than SF , Critter , Komodo...... amazing !!
< And post results in tourn and matches so I can see when I awake. >
That may be problematic , depending on where/what time you get up ??
I live in Wichita , Kansas / USA = ( GMT - 5 hrs )
Test started at 1525 , my time
Running @ 4 mins + 2 secs , 100 games will take about 20 hrs
Maybe I'll throw in an update before crashing tonite , and I usually get up early in the AM..........
Tom
Thanks, Tom. I am in North Louisiana- but problem is I have screwed around and got my days and nights mixed up. Pretty much sleeping from 11:00 AM to 6 or 7PM. But it varies. Thanks again. I am extremely, extremely interested in these results.
Best,
george
-
velmarin
- Posts: 1600
- Joined: Mon Feb 21, 2011 9:48 am
Re: relase Bouquet 1.5 x32,x64,pop64(SSE4.2)
Already replaced, now compiled with Microsoft Visual C + +, this gives even more speed on this platform.
It works for me perfectly, I hope no problems.
Mediafire direct download Bouquet_1.5x32 :
http://www.mediafire.com/?4h5liutmm77fhi6
Download Site
https://sites.google.com/site/chessbouq ... ess-engine Thank you all.
It works for me perfectly, I hope no problems.
Mediafire direct download Bouquet_1.5x32 :
http://www.mediafire.com/?4h5liutmm77fhi6
Download Site
https://sites.google.com/site/chessbouq ... ess-engine Thank you all.
-
Graham Banks
- Posts: 46350
- Joined: Sun Feb 26, 2006 10:52 am
- Location: Auckland, NZ
Re: relase Bouquet 1.5 x32,x64,pop64(SSE4.2)
Still no luck on a Q6600 under WinXP.velmarin wrote:Already replaced, now compiled with Microsoft Visual C + +, this gives even more speed on this platform.
It works for me perfectly, I hope no problems.
Mediafire direct download Bouquet_1.5x32 :
http://www.mediafire.com/?4h5liutmm77fhi6
Download Site
https://sites.google.com/site/chessbouq ... ess-engine Thank you all.
gbanksnz at gmail.com
-
Ajedrecista
- Posts: 2269
- Joined: Wed Jul 13, 2011 9:04 pm
- Location: Madrid, Spain.
Re: Relase Bouquet 1.5 x32, x64, pop64 (SSE4.2).
Hi Chema:
I have Windows XP (Service Pack 2) and my OS is of 32-bit. MSVCR100.dll is required as in 1.4 version, but there is an important difference now: once this DLL was in the same folder of the engine, 1.4 version worked (double click on the executable for console mode) but 1.5 does not work (your first version and also this new one, with different compilers)! Once I double click on the executable, the command prompt is opened:
And an error window appears:
Regards from Spain.
Ajedrecista.
I have Windows XP (Service Pack 2) and my OS is of 32-bit. MSVCR100.dll is required as in 1.4 version, but there is an important difference now: once this DLL was in the same folder of the engine, 1.4 version worked (double click on the executable for console mode) but 1.5 does not work (your first version and also this new one, with different compilers)! Once I double click on the executable, the command prompt is opened:
Code: Select all
Bouquet _1.5 x32
Jose M Velasco https://sites.google.com/site/chessbouquet/
Freeware EngineI hope that this report will help you in identifying the error.Bouquet_1.5x32.exe - Error de aplicación |x|
_________________________________________________________
(X) Se ha producido la excepción unknown software exception (0xc000001d) en la dirección 0x00401bb0.
Haga clic en Aceptar para finalizar este programa
____________
|__Aceptar__|
Regards from Spain.
Ajedrecista.
Last edited by Ajedrecista on Thu Sep 20, 2012 11:24 am, edited 1 time in total.
-
WuShock
- Posts: 182
- Joined: Thu Jul 19, 2007 3:13 am
Re: Tom Glenn- please read- this thread is for you!!
Morning update :
[/img]
Tom
[/img]Tom
-
geots
- Posts: 4790
- Joined: Sat Mar 11, 2006 12:42 am
Re: Tom Glenn- please read- this thread is for you!!
WuShock wrote:Morning update :
[/img]
Tom
Thanks. I expected one hell of a fight in this one.
best,
george
-
geots
- Posts: 4790
- Joined: Sat Mar 11, 2006 12:42 am
Re: Relase Bouquet 1.5 x32, x64, pop64 (SSE4.2).
Ajedrecista wrote:Hi Chema:
I have Windows XP (Service Pack 2) and my OS is of 32-bit. MSVCR100.dll is required as in 1.4 version, but there is an important difference now: once this DLL was in the same folder of the engine, 1.4 version worked (double click on the executable for console mode) but 1.5 does not work (your first version and also this new one, with different compilers)! Once I double click on the executable, the command prompt is opened:
And an error window appears:Code: Select all
Bouquet _1.5 x32 Jose M Velasco https://sites.google.com/site/chessbouquet/ Freeware Engine
I hope that this report will help you in identifying the error.Bouquet_1.5x32.exe - Error de aplicación |x|
_________________________________________________________
(X) Se ha producido la excepción unknown software exception (0xc000001d) en la dirección 0x00401bb0.
Haga clic en Aceptar para finalizar este programa
____________
|__Aceptar__|
Regards from Spain.
Ajedrecista.
This dll you mention- for me it is a problem creator- not a problem solver. Of course no issue on this intel i5 with newest technology. But on my intel XP 64-bit quad, a couple engines, one being Sjakk- won't play because it says it cannot find this dll. It is in 3 different places on the stupid computer. I said hell with it, copied it to the engine folder and stuck it right under his damn nose. Same thing- says he can't find it. So there is more going on here than just locating the dll.
george
[/img]