Discussion of anything and everything relating to chess playing software and machines.
Moderators: hgm, Harvey Williamson, bob
Forum rules
This textbox is used to restore diagrams posted with the [d] tag before the upgrade.
-
Graham Banks
- Posts: 30733
- Joined: Sun Feb 26, 2006 9:52 am
- Location: Auckland, NZ
Post
by Graham Banks » Fri Jan 22, 2010 12:16 am
Thanks to Don and Larry, and to you also Jim for the compile!

My email addresses:
gbanksnz at gmail.com
gbanksnz at yahoo.co.nz
-
Uri Blass
- Posts: 8029
- Joined: Wed Mar 08, 2006 11:37 pm
- Location: Tel-Aviv Israel
Post
by Uri Blass » Fri Jan 22, 2010 12:49 am
The engine seems not to know its name
I tried to install it under chessbase and found no komodo engine but only Doch32 1.0 JA(that seems to be an older version relative to Doch32 1.3.4 JA)
I ran it at console mode and we had the "discussion" that you can see at the end of the post.
when the engine claimed in id name Doch32 and not Komodo
so I understand that what I see as Doch32 1.0 JA is practically Komodo
but I think that it is a bug that should be fixed.
"discussion":
engine:Komodo version 1.0 JA
I:uci
engine:id name Doch32 1.0 JA
...
-
yanquis1972
- Posts: 1618
- Joined: Tue Jun 02, 2009 10:14 pm
Post
by yanquis1972 » Fri Jan 22, 2010 12:49 am
running a manual classical TC game against single core ivanhoe 9.73b (give it a nice challenge & i'll see if IH has ponder or long-think issues). will post the game when its finished.
truncated 5 move QGD
-
Jim Ablett
- Posts: 1327
- Joined: Fri Jul 14, 2006 5:56 am
- Location: London, England
-
Contact:
Post
by Jim Ablett » Fri Jan 22, 2010 1:35 am
Small update to the compiles is available on my homepage that fixes
the uci id name string. It was showing Doch instead of Komodo.
Jim.
-
Don
- Posts: 5106
- Joined: Tue Apr 29, 2008 2:27 pm
Post
by Don » Fri Jan 22, 2010 2:01 am
Indeed, there is a cosmetic bug in the renaming of the version. It's all functionally correct, but it reports the wrong name. I asked Jim Ablett to make the fix - I hope I'm not trying his patience with these glitches.
Uri Blass wrote:The engine seems not to know its name
I tried to install it under chessbase and found no komodo engine but only Doch32 1.0 JA(that seems to be an older version relative to Doch32 1.3.4 JA)
I ran it at console mode and we had the "discussion" that you can see at the end of the post.
when the engine claimed in id name Doch32 and not Komodo
so I understand that what I see as Doch32 1.0 JA is practically Komodo
but I think that it is a bug that should be fixed.
"discussion":
engine:Komodo version 1.0 JA
I:uci
engine:id name Doch32 1.0 JA
...
-
swami
- Posts: 6535
- Joined: Thu Mar 09, 2006 3:21 am
Post
by swami » Fri Jan 22, 2010 2:06 am
Thanks Don, and Jim.
Jim is the greatest in logo making and engine compiling!

-
Don
- Posts: 5106
- Joined: Tue Apr 29, 2008 2:27 pm
Post
by Don » Fri Jan 22, 2010 2:10 am
swami wrote:Thanks Don, and Jim.
Jim is the greatest in logo making and engine compiling!

Yes, Jim is awesome!
-
M ANSARI
- Posts: 3278
- Joined: Thu Mar 16, 2006 6:10 pm
Post
by M ANSARI » Fri Jan 22, 2010 2:22 am
I have to congratulate you on a great achievement. This is most definitely the best tuned evaluation of any engine I have seen. Of course I have only tested some few positions, but the static evaluation is impressive. I think this will score more than the +40 ELO points you mentioned and will give R3 and the latest R3 clones a run for their money. I would rate the static evaluation as being better than R3 or the clone family in many positions.
-
Graham Banks
- Posts: 30733
- Joined: Sun Feb 26, 2006 9:52 am
- Location: Auckland, NZ
Post
by Graham Banks » Fri Jan 22, 2010 7:36 am
I like Don's logo (Jim's?), but here's an alternative if anybody wishes to use it:

My email addresses:
gbanksnz at gmail.com
gbanksnz at yahoo.co.nz