Arena 3.5.1 - Autoplayer

Discussion of anything and everything relating to chess playing software and machines.

Moderator: Ras

User avatar
Nordlandia
Posts: 2834
Joined: Fri Sep 25, 2015 9:38 pm
Location: Sortland, Norway

Re: Arena 3.5.1 - Autoplayer

Post by Nordlandia »

I suggest Teamviewer 11 to help me out :arrow:
User avatar
hgm
Posts: 28484
Joined: Fri Mar 10, 2006 10:06 am
Location: Amsterdam
Full name: H G Muller

Re: Arena 3.5.1 - Autoplayer

Post by hgm »

If you have problems with Fritz you should not look at me for help. I know nothing about it. I only use WinBoard.

You did have it working with Arena, right? Does it still work with Arena? Then it is not a connect64 problem, but a Fritz problem, and you should consult a Fritz expert. Are you sure you installed it with the correct parameter?
User avatar
Nordlandia
Posts: 2834
Joined: Fri Sep 25, 2015 9:38 pm
Location: Sortland, Norway

Re: Arena 3.5.1 - Autoplayer

Post by Nordlandia »

It works in Arena with your remote engine.

Let assume Computer A and B is connected and i load connect64 in Arena with that IP andress. How to make computer A make a move so B can reply.

Cmd commands to make Computer A start the game.

For example if i make a move on B (1. e4) computer A don't reply even connected.
User avatar
hgm
Posts: 28484
Joined: Fri Mar 10, 2006 10:06 am
Location: Amsterdam
Full name: H G Muller

Re: Arena 3.5.1 - Autoplayer

Post by hgm »

So on Arena it never worked when you connected to your own computer?

Then you would have to try it from the command line again, because there we can see what happens. Just type on computer B from the command prompt

C:\connect64\connect64 192.168.10.149

(assuming you already started it with an engine on computer A in the normalway). When it connects, type

uci

What does it reply?
User avatar
hgm
Posts: 28484
Joined: Fri Mar 10, 2006 10:06 am
Location: Amsterdam
Full name: H G Muller

Re: Arena 3.5.1 - Autoplayer

Post by hgm »

Nordlandia wrote:For example if i make a move on B (1. e4) computer A don't reply even connected.
Are you sure you installed the engine as the right type? If you would start connect64 as engine server for Stockfish on computer A, and would have installed connect64 as WB engine in the GUI on computer B, the engine would not move.
Krzysztof Grzelak
Posts: 1610
Joined: Tue Jul 15, 2014 12:47 pm

Re: Arena 3.5.1 - Autoplayer

Post by Krzysztof Grzelak »

Today, a new cable went. I did a test and unfortunately still the same.
User avatar
Nordlandia
Posts: 2834
Joined: Fri Sep 25, 2015 9:38 pm
Location: Sortland, Norway

Re: Arena 3.5.1 - Autoplayer

Post by Nordlandia »

User avatar
Nordlandia
Posts: 2834
Joined: Fri Sep 25, 2015 9:38 pm
Location: Sortland, Norway

Re: Arena 3.5.1 - Autoplayer

Post by Nordlandia »

Image