Reaching Lyudmil Antonov

Discussion of anything and everything relating to chess playing software and machines.

Moderators: hgm, Harvey Williamson, bob

Forum rules
This textbox is used to restore diagrams posted with the [d] tag before the upgrade.
cma6
Posts: 111
Joined: Thu May 29, 2014 3:58 pm

Reaching Lyudmil Antonov

Post by cma6 » Mon Jan 23, 2017 2:01 am

asmFish is a marvel but when there are problems with the latest commit, does anyone know how to reach Lyudmil Antonov?[/code]

User avatar
lantonov
Posts: 216
Joined: Sun Apr 13, 2014 3:19 pm

Re: Reaching Lyudmil Antonov

Post by lantonov » Mon Jan 23, 2017 7:24 am

You can write an issue in asmFish Github (https://github.com/lantonov/asmFish/issues/) and I will respond within an hour. I check the site more often than my e-mail.
BTW, there was a recent issue with the latest commit using large pages which was fixed (I hope).

User avatar
reflectionofpower
Posts: 1454
Joined: Fri Mar 01, 2013 4:28 pm
Location: USA

Re: Reaching Lyudmil Antonov

Post by reflectionofpower » Mon Jan 23, 2017 9:53 am

lantonov wrote:You can write an issue in asmFish Github (https://github.com/lantonov/asmFish/issues/) and I will respond within an hour. I check the site more often than my e-mail.
BTW, there was a recent issue with the latest commit using large pages which was fixed (I hope).
I download the latest EXE's and I go to install them as UCI engine and all I get is a little ↑ but it will not integrate into Fritz GUI. These EXE are all compiled and everything,correct?
"hodie mihi, cras tibi"

Lonnie

User avatar
lantonov
Posts: 216
Joined: Sun Apr 13, 2014 3:19 pm

Re: Reaching Lyudmil Antonov

Post by lantonov » Mon Jan 23, 2017 11:23 am

reflectionofpower wrote:
lantonov wrote:These EXE are all compiled and everything,correct?
Correct. They should work in Fritz GUI, too, like every UCI engine. It has been reported that they work better in Fritz 11 (less problems than Fritz 15). Probably in the newer Fritz they have complemented UCI with a few fancy commands of their own.

User avatar
reflectionofpower
Posts: 1454
Joined: Fri Mar 01, 2013 4:28 pm
Location: USA

Re: Reaching Lyudmil Antonov

Post by reflectionofpower » Mon Jan 23, 2017 11:33 am

lantonov wrote:
reflectionofpower wrote:
lantonov wrote:These EXE are all compiled and everything,correct?
Correct. They should work in Fritz GUI, too, like every UCI engine. It has been reported that they work better in Fritz 11 (less problems than Fritz 15). Probably in the newer Fritz they have complemented UCI with a few fancy commands of their own.
I am using Fritz 14 and I have never had another problem with another engine
like this? I did a search for latest engine asmFISH and I downloaded the 12-17-2016 version and that works in Fritz 14 but ones off your github site do not.
"hodie mihi, cras tibi"

Lonnie

pohl4711
Posts: 930
Joined: Sat Sep 03, 2011 5:25 am
Location: Berlin, Germany
Contact:

Re: Reaching Lyudmil Antonov

Post by pohl4711 » Mon Jan 23, 2017 12:19 pm

reflectionofpower wrote:
lantonov wrote:
reflectionofpower wrote:
lantonov wrote:These EXE are all compiled and everything,correct?
Correct. They should work in Fritz GUI, too, like every UCI engine. It has been reported that they work better in Fritz 11 (less problems than Fritz 15). Probably in the newer Fritz they have complemented UCI with a few fancy commands of their own.
I am using Fritz 14 and I have never had another problem with another engine
like this? I did a search for latest engine asmFISH and I downloaded the 12-17-2016 version and that works in Fritz 14 but ones off your github site do not.
Latest asmFish (170122) from github-page works fine in my Fritz 13.

User avatar
lantonov
Posts: 216
Joined: Sun Apr 13, 2014 3:19 pm

Re: Reaching Lyudmil Antonov

Post by lantonov » Mon Jan 23, 2017 12:28 pm

reflectionofpower wrote:
lantonov wrote:
reflectionofpower wrote:
lantonov wrote: I did a search for latest engine asmFISH and I downloaded the 12-17-2016 version and that works in Fritz 14 but ones off your github site do not.
2016-12-17 was compiled by me as all the rest of the asmFishes. It is not the latest asmFish, the latest being 2017-01-22 from several hours ago.

I have several testers with Fritz GUI who have no problem installing asmFish in their system. You are the first one with such a problem making me think that something is wrong with your installation.

BTW, the latest patch:
2017-01-22 fix bug where large page alloc must not fail
fixes a problem that happened on a Fritz GUI. The guy reported 2 hours ago that everything works normal for him (with large pages).

User avatar
lantonov
Posts: 216
Joined: Sun Apr 13, 2014 3:19 pm

Re: Reaching Lyudmil Antonov

Post by lantonov » Mon Jan 23, 2017 12:48 pm

What version are you using -- base, popcnt, or bmi2 ?

User avatar
reflectionofpower
Posts: 1454
Joined: Fri Mar 01, 2013 4:28 pm
Location: USA

Re: Reaching Lyudmil Antonov

Post by reflectionofpower » Mon Jan 23, 2017 12:51 pm

lantonov wrote:What version are you using -- base, popcnt, or bmi2 ?
I use popcnt and that's the version I have used with no problems before. I just tried your latest version with base, same problem, small arrow and it will not load. Using Deep Fritz 14 64 bit in Windows 8.1 64 bit Pro OS.

In fact for poops and giggles I went on your github site, downloaded 12-17-2016 and I get the same error but when I downloaded it off another site it was fine??
"hodie mihi, cras tibi"

Lonnie

User avatar
lantonov
Posts: 216
Joined: Sun Apr 13, 2014 3:19 pm

Re: Reaching Lyudmil Antonov

Post by lantonov » Mon Jan 23, 2017 1:17 pm

reflectionofpower wrote: In fact for poops and giggles I went on your github site, downloaded 12-17-2016 and I get the same error but when I downloaded it off another site it was fine??
So the problem is my github site then :)
Well, then use the version that works for you. Or better, compile it yourself. Everything you need for compiling is on my abominous github, including the fasm compilers.

Post Reply