Page 1 of 2

Prime Cut

Posted: Sat Sep 05, 2020 4:40 am
by Graham Banks
PRIME CUT

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
SuperGM2020.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
4 cycles 36 rounds
All engines 64-bit where available


Participants

Combusken 1.3.1 64-bit
Minic 2.48 64-bit
Pirarucu 3.3.5 64-bit
Beef 0.2 64-bit
Marvin 4.0.0 64-bit
Monolith 2.0 64-bit
Bagatur 2.2 64-bit
Topple 0.7.5 64-bit
Deuterium 2019.37.73 64-bit
Amoeba 3.2 64-bit
Godel 7.0 64-bit
FabChess 1.15 64-bit

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Re: Prime Cut

Posted: Sat Sep 05, 2020 4:42 am
by Graham Banks
Games and standings will be available after every six rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=12367

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/

Re: Prime Cut

Posted: Tue Sep 08, 2020 4:48 am
by Graham Banks
PRIME CUT

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
SuperGM2020.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
4 cycles 36 rounds
All engines 64-bit where available


Standings after Round 6

4.5 - Beef 0.2 64-bit
3.5 - Minic 2.48 64-bit
3.5 - Bagatur 2.2 64-bit
3.5 - Combusken 1.3.1 64-bit
3.5 - Marvin 4.0.0 64-bit
3.0 - Monolith 2.0 64-bit
3.0 - Topple 0.7.5 64-bit
2.5 - FabChess 1.15 64-bit
2.5 - Pirarucu 3.3.5 64-bit
2.5 - Amoeba 3.2 64-bit
2.0 - Godel 7.0 64-bit
2.0 - Deuterium 2019.2.37.73 64-bit


Games and standings will be available after every six rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=12367

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/

Re: Prime Cut

Posted: Fri Sep 11, 2020 7:36 am
by Graham Banks
PRIME CUT

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
SuperGM2020.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
4 cycles 36 rounds
All engines 64-bit where available


Standings after Round 12

9.5 - Beef 0.2 64-bit
7.5 - Marvin 4.0.0 64-bit
7.0 - Minic 2.48 64-bit
6.5 - Combusken 1.3.1 64-bit
6.0 - Godel 7.0 64-bit
6.0 - Bagatur 2.2 64-bit
6.0 - Topple 0.7.5 64-bit
5.5 - Amoeba 3.2 64-bit
5.0 - Pirarucu 3.3.5 64-bit
5.0 - Monolith 2.0 64-bit
4.0 - FabChess 1.15 64-bit
4.0 - Deuterium 2019.2.37.73 64-bit


Games and standings will be available after every six rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=12367

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/

Re: Prime Cut

Posted: Sat Sep 12, 2020 6:45 am
by Graham Banks
PRIME CUT

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
SuperGM2020.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
4 cycles 36 rounds
All engines 64-bit where available


Standings after Round 18

14.5 - Beef 0.2 64-bit
10.5 - Combusken 1.3.1 64-bit
10.5 - Marvin 4.0.0 64-bit
10.0 - Minic 2.48 64-bit
9.5 - Amoeba 3.2 64-bit
9.0 - Bagatur 2.2 64-bit
9.0 - Monolith 2.0 64-bit
8.5 - Pirarucu 3.3.5 64-bit
8.5 - Topple 0.7.5 64-bit
6.5 - Godel 7.0 64-bit
6.0 - Deuterium 2019.2.37.73 64-bit
5.5 - FabChess 1.15 64-bit


Games and standings will be available after every six rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=12367

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/

Re: Prime Cut

Posted: Tue Sep 15, 2020 1:27 am
by Graham Banks
PRIME CUT

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
SuperGM2020.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
4 cycles 36 rounds
All engines 64-bit where available


Standings after Round 24

17.0 - Beef 0.2 64-bit
14.5 - Minic 2.48 64-bit
13.5 - Marvin 4.0.0 64-bit
13.5 - Monolith 2.0 64-bit
12.5 - Pirarucu 3.3.5 64-bit
12.5 - Amoeba 3.2 64-bit
12.5 - Combusken 1.3.1 64-bit
11.5 - Bagatur 2.2 64-bit
11.5 - Topple 0.7.5 64-bit
9.5 - Deuterium 2019.2.37.73 64-bit
9.0 - Godel 7.0 64-bit
6.5 - FabChess 1.15 64-bit


Games and standings will be available after every six rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=12367

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/

Re: Prime Cut

Posted: Thu Sep 17, 2020 8:58 am
by Graham Banks
PRIME CUT

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
SuperGM2020.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
4 cycles 36 rounds
All engines 64-bit where available


Standings after Round 30

21.0 - Beef 0.2 64-bit
17.5 - Minic 2.48 64-bit
16.5 - Amoeba 3.2 64-bit
16.0 - Marvin 4.0.0 64-bit
16.0 - Monolith 2.0 64-bit
15.0 - Pirarucu 3.3.5 64-bit
15.0 - Combusken 1.3.1 64-bit
14.5 - Topple 0.7.5 64-bit
13.5 - Bagatur 2.2 64-bit
13.5 - Deuterium 2019.2.37.73 64-bit
12.0 - Godel 7.0 64-bit
9.5 - FabChess 1.15 64-bit


Games and standings will be available after every six rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=12367

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/

Re: Prime Cut

Posted: Sun Sep 20, 2020 10:31 pm
by Graham Banks
PRIME CUT

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
SuperGM2020.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
4 cycles 36 rounds
All engines 64-bit where available


Standings after Round 36

25.5 - Beef 0.2 64-bit
21.5 - Minic 2.48 64-bit
20.0 - Marvin 4.0.0 64-bit
20.0 - Amoeba 3.2 64-bit
19.5 - Combusken 1.3.1 64-bit
17.5 - Pirarucu 3.3.5 64-bit
17.5 - Monolith 2.0 64-bit
16.0 - Deuterium 2019.2.37.73 64-bit
15.5 - Bagatur 2.2 64-bit
15.5 - Topple 0.7.5 64-bit
15.0 - Godel 7.0 64-bit
12.5 - FabChess 1.15 64-bit


Games and standings will be available after every six rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=12367

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/

Re: Prime Cut

Posted: Wed Sep 23, 2020 12:09 am
by Graham Banks
PRIME CUT

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
SuperGM2020.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
4 cycles 44 rounds
All engines 64-bit where available


Final Standings

31.0 - Beef 0.2 64-bit
25.5 - Minic 2.48 64-bit
24.0 - Marvin 4.0.0 64-bit
24.0 - Combusken 1.3.1 64-bit
23.0 - Amoeba 3.2 64-bit
22.5 - Monolith 2.0 64-bit
21.5 - Pirarucu 3.3.5 64-bit
20.0 - Bagatur 2.2 64-bit
19.5 - Deuterium 2019.2.37.73 64-bit
19.0 - Topple 0.7.5 64-bit
17.5 - Godel 7.0 64-bit
16.5 - FabChess 1.15 64-bit


The complete tournament pgn (zipped) can be downloaded here:
http://kirill-kryukov.com/chess/discuss ... p?id=47108

Re: Prime Cut

Posted: Wed Sep 23, 2020 12:12 am
by Graham Banks
Congratulations to Jonathan (Beef author) for an impressive win. :)

Thanks to all who took an interest, either through following updates or visiting the broadcast.