The Red Jewel 4CPU

Discussion of computer chess matches and engine tournaments.

Moderators: hgm, Harvey Williamson, bob

Forum rules
This textbox is used to restore diagrams posted with the [d] tag before the upgrade.
User avatar
Graham Banks
Posts: 32761
Joined: Sun Feb 26, 2006 9:52 am
Location: Auckland, NZ

Re: The Red Jewel 4CPU

Post by Graham Banks » Mon Feb 18, 2019 8:08 pm

THE RED JEWEL 4CPU

Intel Xeon X5430x2 Octal
ChessGUI
1024mb hash each where possible
3-4-5 piece tablebases
Ponder off
TWIC2018.cgb book
40 moves in 30 minutes repeating (adapted for the CCRL)
10 cycles 70 rounds


Standings after Round 14

9.5 - RubiChess 1.3 64-bit 4CPU
8.5 - Demolito 2018-10-29 64-bit 4CPU
7.5 - Marvin 3.2.0 64-bit 4CPU
7.0 - The Baron 3.44 64-bit 4CPU
7.0 - Scorpio 2.8 64-bit 4CPU
6.5 - Pirarucu 2.7.4 64-bit 4CPU
6.5 - Winter 0.4a 64-bit 4CPU
3.5 - Lc0 0.20.1 11258 64-bit


Games will be available for download after each cycle from here:
http://kirill-kryukov.com/chess/discuss ... =7&t=10820

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16083

Linux users can access the live broadcast through using Livius:
https://github.com/kmar/livius

There is now a Livius windows version, thanks to Andreas (RubiChess author).
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
My email addresses:
gbanksnz at gmail.com
gbanksnz at yahoo.co.nz

User avatar
Graham Banks
Posts: 32761
Joined: Sun Feb 26, 2006 9:52 am
Location: Auckland, NZ

Re: The Red Jewel 4CPU

Post by Graham Banks » Wed Feb 20, 2019 10:39 am

THE RED JEWEL 4CPU

Intel Xeon X5430x2 Octal
ChessGUI
1024mb hash each where possible
3-4-5 piece tablebases
Ponder off
TWIC2018.cgb book
40 moves in 30 minutes repeating (adapted for the CCRL)
10 cycles 70 rounds


Standings after Round 21

14.0 - RubiChess 1.3 64-bit 4CPU
12.5 - Demolito 2018-10-29 64-bit 4CPU
11.5 - Marvin 3.2.0 64-bit 4CPU
11.0 - Scorpio 2.8 64-bit 4CPU
10.0 - Pirarucu 2.7.4 64-bit 4CPU
9.5 - The Baron 3.44 64-bit 4CPU
8.5 - Winter 0.4a 64-bit 4CPU
7.0 - Lc0 0.20.1 11258 64-bit


Games will be available for download after each cycle from here:
http://kirill-kryukov.com/chess/discuss ... =7&t=10820

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16083

Linux users can access the live broadcast through using Livius:
https://github.com/kmar/livius

There is now a Livius windows version, thanks to Andreas (RubiChess author).
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
My email addresses:
gbanksnz at gmail.com
gbanksnz at yahoo.co.nz

mar
Posts: 1979
Joined: Fri Nov 26, 2010 1:00 pm
Location: Czech Republic
Full name: Martin Sedlak

Re: The Red Jewel 4CPU

Post by mar » Wed Feb 20, 2019 12:08 pm

Graham Banks wrote:
Wed Feb 20, 2019 10:39 am
There is now a Livius windows version, thanks to Andreas (RubiChess author).
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
Umm, I don't know anything about the RubiChess author, but this is a Windows version I built 3 years ago, the link points to my pages :)
If by "live pv boards" you mean "PV Tip" checkbox, then that's also old news. Now either someone is trolling you or you're trolling me, Graham :D
Martin Sedlak

RubiChess
Posts: 95
Joined: Fri Mar 30, 2018 5:20 am

Re: The Red Jewel 4CPU

Post by RubiChess » Wed Feb 20, 2019 3:38 pm

mar wrote:
Wed Feb 20, 2019 12:08 pm
Graham Banks wrote:
Wed Feb 20, 2019 10:39 am
There is now a Livius windows version, thanks to Andreas (RubiChess author).
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
Umm, I don't know anything about the RubiChess author, but this is a Windows version I built 3 years ago, the link points to my pages :)
If by "live pv boards" you mean "PV Tip" checkbox, then that's also old news. Now either someone is trolling you or you're trolling me, Graham :D
Hi Martin.

Livius is of course your (very nice) piece of work. Graham must have missed something when we talked about Livius last weekend.
Fact is that I only knew your Github repository with the sources that Graham has linked in every of his posts. I compiled and ran it under Linux and liked it so much that I tried to compile it for Windows (not knowing that you already have a binary for download). It was a hard job to make it under Windows but when I was successful, I told Graham that now that I have the sources and can compile for Windows I would be able to add one or two tweaks in the future if needed.
Then someone sent the link to your binary in Grahams chat and I thought "Okay, I could have saved a lot of time :-)". I could swear that it was Graham himself who sent the link but then his "thanks to Andreas" wouldn't make sense at all.

So to clarify: You and only you are the one to thank for the Livius Client.Which I would like to do here.

./Andreas

RubiChess
Posts: 95
Joined: Fri Mar 30, 2018 5:20 am

Re: The Red Jewel 4CPU

Post by RubiChess » Wed Feb 20, 2019 3:47 pm

One Addition: Graham asked in the chat if Livius is better than the TLCP client cause he didn't know it. I told him that e.g. it has PV boards and I sent him a screenshot to have an idea of Livius GUI. I hope, Graham doesn't believe that _I_ had implemented these PV boards in just some minutes. That would be way beyond my potentials. :-)

./Andreas

mar
Posts: 1979
Joined: Fri Nov 26, 2010 1:00 pm
Location: Czech Republic
Full name: Martin Sedlak

Re: The Red Jewel 4CPU

Post by mar » Wed Feb 20, 2019 4:03 pm

Ok, no problem. I think this clears up the confusion :)
Martin Sedlak

dkappe
Posts: 196
Joined: Tue Aug 21, 2018 5:52 pm
Full name: Dietrich Kappe

Re: The Red Jewel 4CPU

Post by dkappe » Wed Feb 20, 2019 4:52 pm

It’s a shame that lc0 was run on only 1 cpu. It’s exactly at the inflection point of the strength curve where another 3 threads would have helped a great deal.

User avatar
Graham Banks
Posts: 32761
Joined: Sun Feb 26, 2006 9:52 am
Location: Auckland, NZ

Re: The Red Jewel 4CPU

Post by Graham Banks » Wed Feb 20, 2019 9:00 pm

RubiChess wrote:
Wed Feb 20, 2019 3:38 pm
So to clarify: You and only you are the one to thank for the Livius Client.Which I would like to do here.

./Andreas
I'll correct this in future posts.
Apologies to Martin. :oops:
My email addresses:
gbanksnz at gmail.com
gbanksnz at yahoo.co.nz

marcd
Posts: 3
Joined: Wed Apr 01, 2015 4:55 pm

Re: The Red Jewel 4CPU

Post by marcd » Thu Feb 21, 2019 8:25 am

RubiChess wrote:
Wed Feb 20, 2019 3:47 pm
One Addition: Graham asked in the chat if Livius is better than the TLCP client cause he didn't know it. I told him that e.g. it has PV boards and I sent him a screenshot to have an idea of Livius GUI. I hope, Graham doesn't believe that _I_ had implemented these PV boards in just some minutes. That would be way beyond my potentials. :-)

./Andreas
Hi Andreas

Ist it possible to make a compile for Android?

RubiChess
Posts: 95
Joined: Fri Mar 30, 2018 5:20 am

Re: The Red Jewel 4CPU

Post by RubiChess » Thu Feb 21, 2019 8:51 am

marcd wrote:
Thu Feb 21, 2019 8:25 am
Hi Andreas

Ist it possible to make a compile for Android?
Qt5 seems to support Android but I have never compiled anything for Android. Could be an interesting task. I will have a look maybe next weekend.

./Andreas

Post Reply