a0lite problems with badygal configuration etc.

[Norbert Raimund Leisner]

Hello,

I am using Windows 7 64-bit SP1 as operating system on my computer.

After changing my password at GitHub that I use for log-in (including email / username) and installation of badygal with Windows-prompt
are the following informations visible:

C:\Users\NRL>pip install git+http://github.com/dkappe/badygal.git
Collecting git+http://github.com/dkappe/badygal.git
Cloning http://github.com/dkappe/badygal.git to c:\users\nrl\appdata\local\temp\pip-req-build-ivncvyea
Running command git clone -q http://github.com/dkappe/badygal.git 'C:\Users\NRL\AppData\Local\Temp\pip-req-build-ivncvyea'
fatal: HttpRequestException encountered.
Fehler beim Senden der Anforderung. (Failed to send the request.)

bash: /dev/tty: No such device or address
error: failed to execute prompt script (exit code 1)
fatal: could not read Username for 'https://github.com': No error

ERROR: Command errored out with exit status 128: git clone -q http://github.com/dkappe/badygal.git 'C:\Users\NRL\AppData\Local\Temp\pip-req-build-ivncvyea' Check the logs for full command output.

pip-20.1.1 is successfully installed

a0lite
https://github.com/dkappe/a0lite

badygal
https://github.com/dkappe/badgyal

Python 3.8.3 for Windows 64-bit
https://www.python.org/ftp/python/3.8.3 ... -amd64.exe

cf. this path C:\User\NRL\AppData\Local\Programs\Python\Python38

GUIs (graphical user interfaces)

Arena 3.5.1
http://www.playwitharena.de/downloads/arena_3.5.1.zip

WinBoardAA beta
http://hgm.nubati.net/WinBoard-AA.zip

The extracted files a0lite respectively badygal are located in the same folder like python.exe

What esential informations have to contain the executbles and commandline-parameters of Arena/WinBoard GUIs?

Does a0lite works without neural net like Scorpio Chess, too with the following specifications?

CPU
Intel Core i5 3470
Cores 4
Threads 4
Name Intel Core i5 3470
Code Name Ivy Bridge
Package Socket 1155 LGA
Technology 22nm
Specification Intel Core i5-3470 CPU @ 3.20GHz
Family 6
Extended Family 6
Model A
Extended Model 3A
Stepping 9
Revision N0
Instructions MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64, NX, VMX, AES, AVX
Virtualization Supported, Enabled
Hyperthreading Not supported
Fan Speed 1599 RPM
Stock Core Speed 3200 MHz
Stock Bus Speed 100 MHz
Average Temperature 36 °C
Caches
L1 Data Cache Size 4 x 32 KBytes
L1 Instructions Cache Size 4 x 32 KBytes
L2 Unified Cache Size 4 x 256 KBytes
L3 Unified Cache Size 6144 KBytes
RAM
Memory slots
Total memory slots 2
Used memory slots 2
Free memory slots 0
Memory
Type DDR3
Size 4096 MBytes
Channels # Dual
DRAM Frequency 798.1 MHz
CAS# Latency (CL) 11 clocks
RAS# to CAS# Delay (tRCD) 11 clocks
RAS# Precharge (tRP) 11 clocks
Cycle Time (tRAS) 28 clocks
Command Rate (CR) 2T
Physical Memory
Memory Usage 61 %
Total Physical 3.71 GB
Available Physical 1.43 GB
Total Virtual 7.41 GB
Available Virtual 5.00 GB

Any suggestions are welcome!

Regards,
Norbert

[dkappe]

Odd. Looks like an issue with github. You should need an email+password for installing.

You could just clone it and then do a

Code: Select all

pip install .

in the badgyal dir.