Page 44 of 47
Re: New engine releases 2019
Posted: Fri Dec 06, 2019 4:11 pm
by Guenther
Gabor Szots wrote: ↑Fri Dec 06, 2019 4:05 pm
Terje wrote: ↑Fri Dec 06, 2019 3:04 pmI've added 3 windows compiles to the tag. Feedback on whether they work or not would be appreciated :)
Thanks Terje. All three work for me. Under Shredder 13 I measure the following approximate speeds:
nopop: 1250 knps
pop: 1360
pext: 1430
Günther's compile: 3420 knps
oops :)
I can confirm only that my compile is around three times as fast as Terjes nopopcnt version.
(ca. 600kn vs. 1.800 kn on my hardware - only measured from starting position at higher depths)
Re: New engine releases 2019
Posted: Fri Dec 06, 2019 4:26 pm
by Terje
Gabor Szots wrote: ↑Fri Dec 06, 2019 4:05 pm
Terje wrote: ↑Fri Dec 06, 2019 3:04 pmI've added 3 windows compiles to the tag. Feedback on whether they work or not would be appreciated
Thanks Terje. All three work for me. Under Shredder 13 I measure the following approximate speeds:
nopop: 1250 knps
pop: 1360
pext: 1430
Günther's compile: 3420 knps
Oh, I forgot the O3 flag
I've reuploaded new versions with it. Hopefully these will be comparable to Günther's
Re: New engine releases 2019
Posted: Fri Dec 06, 2019 4:41 pm
by Gabor Szots
Terje wrote: ↑Fri Dec 06, 2019 4:26 pmOh, I forgot the O3 flag
I've reuploaded new versions with it. Hopefully these will be comparable to Günther's
That's more like it. Now the pext compile is about 4200 knps.
Re: New engine releases 2019
Posted: Fri Dec 06, 2019 4:51 pm
by Terje
Gabor Szots wrote: ↑Fri Dec 06, 2019 4:41 pm
Terje wrote: ↑Fri Dec 06, 2019 4:26 pmOh, I forgot the O3 flag
I've reuploaded new versions with it. Hopefully these will be comparable to Günther's
That's more like it. Now the pext compile is about 4200 knps.
Sweet, thanks for the feedback!
Re: New engine releases 2019
Posted: Fri Dec 06, 2019 5:04 pm
by Guenther
Terje wrote: ↑Fri Dec 06, 2019 4:26 pm
Gabor Szots wrote: ↑Fri Dec 06, 2019 4:05 pm
Terje wrote: ↑Fri Dec 06, 2019 3:04 pmI've added 3 windows compiles to the tag. Feedback on whether they work or not would be appreciated :)
Thanks Terje. All three work for me. Under Shredder 13 I measure the following approximate speeds:
nopop: 1250 knps
pop: 1360
pext: 1430
Günther's compile: 3420 knps
Oh, I forgot the O3 flag :D I've reuploaded new versions with it. Hopefully these will be comparable to Günther's :)
Yours is now 1-2% faster than mine here.
Re: New engine releases 2019
Posted: Fri Dec 06, 2019 5:17 pm
by Terje
Guenther wrote: ↑Fri Dec 06, 2019 5:04 pm
Terje wrote: ↑Fri Dec 06, 2019 4:26 pm
Gabor Szots wrote: ↑Fri Dec 06, 2019 4:05 pm
Terje wrote: ↑Fri Dec 06, 2019 3:04 pmI've added 3 windows compiles to the tag. Feedback on whether they work or not would be appreciated
Thanks Terje. All three work for me. Under Shredder 13 I measure the following approximate speeds:
nopop: 1250 knps
pop: 1360
pext: 1430
Günther's compile: 3420 knps
Oh, I forgot the O3 flag
I've reuploaded new versions with it. Hopefully these will be comparable to Günther's
Yours is now 1-2% faster than mine here.
Sweet
Thanks for testing it!
Re: New engine releases 2019
Posted: Tue Dec 10, 2019 12:45 pm
by Norbert Raimund Leisner
Re: New engine releases 2019
Posted: Tue Dec 10, 2019 12:53 pm
by Damir
Kelly is working on new BrainlearnMCTS, but it seems there is no working compile as yet
https://github.com/Kellykinyama12/BrainlearnMCTS
Re: New engine releases 2019
Posted: Wed Dec 11, 2019 5:13 am
by tmokonen
I see the UltimaIQ Stockfish and CorChess compiles have been updated. I downloaded the December 3 compiles but accidentally deleted them. Does anyone have those? Thanks.
Re: New engine releases 2019
Posted: Thu Dec 19, 2019 8:42 pm
by Gabor Szots