Lczero 0.8 (CPU and GPU) does not run in Fritz 16 (not possible to create an UCI-engine). Not with or without inBetween-adapter. v0.7 runs in Fritz 16, but since the networks are 15x192, v0.7 only works in Fritz 16, when inBetween-adapter is used.
In Fritz 13 v0.7 and v0.8 are working without any problems and without inBetween-adapter.
lczero v0.8 does not run in Fritz 16
Moderators: hgm, Rebel, chrisw
-
- Posts: 2435
- Joined: Sat Sep 03, 2011 7:25 am
- Location: Berlin, Germany
- Full name: Stefan Pohl
-
- Posts: 4606
- Joined: Wed Oct 01, 2008 6:33 am
- Location: Regensburg, Germany
- Full name: Guenther Simon
Re: lczero v0.8 does not run in Fritz 16
Is this with syzygy enabled?pohl4711 wrote:Lczero 0.8 (CPU and GPU) does not run in Fritz 16 (not possible to create an UCI-engine). Not with or without inBetween-adapter. v0.7 runs in Fritz 16, but since the networks are 15x192, v0.7 only works in Fritz 16, when inBetween-adapter is used.
In Fritz 13 v0.7 and v0.8 are working without any problems and without inBetween-adapter.
I noticed that the already slow startup time nearly has doubled with 5men only syzygy at least on my hardware.
I am not even sure it will run anymore in cutechess-cli with that startup time.
Had no time to test it yet - only tried it from commandline so far.
Edit:
Still runs in CuteChess-Cli, but starts late after 18 seconds the first time,
second time 10 seconds (Prefetching!)
(This was with syzygy 5men, they just don't show up in the debug from cute.)
Code: Select all
Indexing opening suite...
25 >LCZero_08ID242(0): uci
62 >Rotor_08(1): uci
275 <Rotor_08(1): id name Rotor 0.8
276 <Rotor_08(1): id author Jan Brouwer
277 <Rotor_08(1): option name Hash type spin default 16 min 1 max 1000
278 <Rotor_08(1): uciok
279 >Rotor_08(1): setoption name Hash value 256
279 >Rotor_08(1): isready
567 <Rotor_08(1): readyok
18750 <LCZero_08ID242(0): id name lczero v0.8
18751 <LCZero_08ID242(0): id author The LCZero Authors
18752 <LCZero_08ID242(0): option name Threads type spin default 2 min 1 max 4
18753 <LCZero_08ID242(0): option name Quiet type check default false
18754 <LCZero_08ID242(0): option name FPU Reduction type string default 0.100000
18755 <LCZero_08ID242(0): option name Puct type string default 0.600000
18756 <LCZero_08ID242(0): option name SlowMover type spin default 89 min 1 max 2147483647
18756 <LCZero_08ID242(0): option name Go Nodes Visits type check default true
18756 <LCZero_08ID242(0): uciok
18757 >LCZero_08ID242(0): isready
18757 <LCZero_08ID242(0): readyok
Indexing opening suite...
26 >LCZero_08ID242(0): uci
41 >Rotor_08(1): uci
144 <Rotor_08(1): id name Rotor 0.8
144 <Rotor_08(1): id author Jan Brouwer
146 <Rotor_08(1): option name Hash type spin default 16 min 1 max 1000
147 <Rotor_08(1): uciok
147 >Rotor_08(1): setoption name Hash value 256
148 >Rotor_08(1): isready
427 <Rotor_08(1): readyok
14569 <LCZero_08ID242(0): id name lczero v0.8
14569 <LCZero_08ID242(0): id author The LCZero Authors
14570 <LCZero_08ID242(0): option name Threads type spin default 2 min 1 max 4
14572 <LCZero_08ID242(0): option name Quiet type check default false
14574 <LCZero_08ID242(0): option name FPU Reduction type string default 0.100000
14575 <LCZero_08ID242(0): option name Puct type string default 0.600000
14576 <LCZero_08ID242(0): option name SlowMover type spin default 89 min 1 max 2147483647
14577 <LCZero_08ID242(0): option name Go Nodes Visits type check default true
14577 <LCZero_08ID242(0): uciok
14577 >LCZero_08ID242(0): isready
14578 <LCZero_08ID242(0): readyok
-
- Posts: 2435
- Joined: Sat Sep 03, 2011 7:25 am
- Location: Berlin, Germany
- Full name: Stefan Pohl
Re: lczero v0.8 does not run in Fritz 16
No, I never use Syzygy-Bases.
-
- Posts: 251
- Joined: Sat Dec 02, 2006 10:47 pm
- Location: Toronto
- Full name: Peter Kasinski
Re: lczero v0.8 does not run in Fritz 16
No issues with Fritz14 GUI, although loading the engine is clearly taking longer than before. Aside from that, no issues. I do use inBetween.pohl4711 wrote:Lczero 0.8 (CPU and GPU) does not run in Fritz 16 (not possible to create an UCI-engine). Not with or without inBetween-adapter. v0.7 runs in Fritz 16, but since the networks are 15x192, v0.7 only works in Fritz 16, when inBetween-adapter is used.
In Fritz 13 v0.7 and v0.8 are working without any problems and without inBetween-adapter.
PK
-
- Posts: 2435
- Joined: Sat Sep 03, 2011 7:25 am
- Location: Berlin, Germany
- Full name: Stefan Pohl
Re: lczero v0.8 does not run in Fritz 16
In german CSS , J.Hartmann wrote, that in Fritz 15 lczero v0.8 is running, too.kasinp wrote:No issues with Fritz14 GUI, although loading the engine is clearly taking longer than before. Aside from that, no issues. I do use inBetween.pohl4711 wrote:Lczero 0.8 (CPU and GPU) does not run in Fritz 16 (not possible to create an UCI-engine). Not with or without inBetween-adapter. v0.7 runs in Fritz 16, but since the networks are 15x192, v0.7 only works in Fritz 16, when inBetween-adapter is used.
In Fritz 13 v0.7 and v0.8 are working without any problems and without inBetween-adapter.
PK
Only Fritz 16 is the problem.
-
- Posts: 1142
- Joined: Thu Dec 28, 2017 4:06 pm
- Location: Argentina
Re: lczero v0.8 does not run in Fritz 16
Did you run the tuner manually before using fritz? Remember that the 1st time you load the engine, it will run the (shortened) self-tuning routine and that will take longer than a normal start. Maybe that's why fritz is not working anymore?pohl4711 wrote:Lczero 0.8 (CPU and GPU) does not run in Fritz 16 (not possible to create an UCI-engine). Not with or without inBetween-adapter. v0.7 runs in Fritz 16, but since the networks are 15x192, v0.7 only works in Fritz 16, when inBetween-adapter is used.
In Fritz 13 v0.7 and v0.8 are working without any problems and without inBetween-adapter.
Follow my tournament and some Leela gauntlets live at http://twitch.tv/ccls
-
- Posts: 2435
- Joined: Sat Sep 03, 2011 7:25 am
- Location: Berlin, Germany
- Full name: Stefan Pohl
Re: lczero v0.8 does not run in Fritz 16
CMCanavessi wrote:Did you run the tuner manually before using fritz? Remember that the 1st time you load the engine, it will run the (shortened) self-tuning routine and that will take longer than a normal start. Maybe that's why fritz is not working anymore?pohl4711 wrote:Lczero 0.8 (CPU and GPU) does not run in Fritz 16 (not possible to create an UCI-engine). Not with or without inBetween-adapter. v0.7 runs in Fritz 16, but since the networks are 15x192, v0.7 only works in Fritz 16, when inBetween-adapter is used.
In Fritz 13 v0.7 and v0.8 are working without any problems and without inBetween-adapter.
Of course. I tuned lczero before. And in Fritz 13 it is running perfectly. Only in Fritz 16 v0.8 is not running.
-
- Posts: 117
- Joined: Wed Aug 22, 2007 4:39 pm
Re: lczero v0.8 does not run in Fritz 16
Version 8 will not load in my Fritz 16 either, I thought it was just me.lol I tried everything even in administrator mode. So do we have to reinstall Fritz 12?
-
- Posts: 3019
- Joined: Wed Mar 08, 2006 9:57 pm
- Location: Rio de Janeiro, Brazil
Re: lczero v0.8 does not run in Fritz 16
Hi Stefan,pohl4711 wrote:Lczero 0.8 (CPU and GPU) does not run in Fritz 16 (not possible to create an UCI-engine). Not with or without inBetween-adapter. v0.7 runs in Fritz 16, but since the networks are 15x192, v0.7 only works in Fritz 16, when inBetween-adapter is used.
In Fritz 13 v0.7 and v0.8 are working without any problems and without inBetween-adapter.
I had a similar issue in Fritz 16, though not in Komodo 11 or Houdini 6 interface. To solve this, I used Polyglot.
http://hgm.nubati.net/polyglot.exe
And used the following in the Polyglot.ini file:
[PolyGlot]
EngineCommand=lczero.exe -t3 --uci
EngineDir=.
Log=true
LogFile=polyglot.log
ShowTbHits=false
Book=false
[Engine]
Hash=1024
SyzygyPath=
Please note that this is with the GPU version of v0.8 and tuned for -t3 as I use a GTX1060. Feel free to modify that parameter.
Place both Polyglot.exe and Polyglot.ini in the LCZero folder, and install Polyglot.exe as the UCI engine.
Cheers,
Albert
"Tactics are the bricks and sticks that make up a game, but positional play is the architectural blueprint."
-
- Posts: 1766
- Joined: Wed Jun 03, 2009 12:14 am
Re: lczero v0.8 does not run in Fritz 16
sorry to turn this into a tech support 101 thread, but i'm having issues with the leela & polyglot .exe's opening a command prompt for a flash & promptly closing it. only thing i know to do is run as administrator, which just repeats the problem...anyone know what might be the issue?