Re: Senpai 2.0
Posted: Tue Nov 14, 2017 5:06 am
Tony, would you mind to compile a 64 bit no popcount version too?
Page 4 of 5
Re: Senpai 2.0
Posted: Tue Nov 14, 2017 7:39 am
Re: Senpai 2.0
Posted: Tue Nov 14, 2017 11:41 pm
Hi Guenther, can you try this compile and let me know if it works? Thanks.
http://tonyschess.x10host.com/Senpai20x64nopopTM.rar
http://tonyschess.x10host.com/Senpai20x64nopopTM.rar
Re: Senpai 2.0
Posted: Wed Nov 15, 2017 4:19 am
Thank you Tony, you are very nice....
Fern
Fern
Re: Senpai 2.0
Posted: Wed Nov 15, 2017 2:28 pm
Hi Tony, thanks a lot, it works!tmokonen wrote:Hi Guenther, can you try this compile and let me know if it works? Thanks.
Below analysis 1 thread + 256M hash, start position on my machine.
Code: Select all
exclude: none best +tail
dep score nodes time (not shown: tbhits knps seldep)
21 +0.09 12.2M 0:27.27 d2d4 d7d5 e2e3 g8f6 g1f3 e7e6 c2c4 f8e7 f1d3 e8g8 e1g1 d5c4 d3c4 c7c5 f3e5 b8d7 c4d3 c5d4 e5d7 f6d7
20 +0.19 8.71M 0:19.36 d2d4 d7d5 e2e3 g8f6 g1f3 e7e6 c2c4 f8d6 f1e2 e8g8 e1g1 d5c4 b1c3 c7c5 c3b5 c5d4 e2c4 b8c6 f3d4 f6e4 d4c6 b7c6 b5d6 e4d6
20 +0.17 5.75M 0:12.34 e2e4 e7e5 b1c3 b8c6 g1f3 g8f6 f1e2 f8b4 e1g1 b4c3 d2c3 e8g8 d1d3 h7h6 c1e3 d7d6 a2a3 a7a6 e3d2
19 +0.27 5.49M 0:11.77 e2e4 e7e5 b1c3 b8c6 g1f3 g8f6 f1e2 f8b4 e1g1 b4c3 d2c3 e8g8 d1d3 h7h6 c1e3 d7d6 h2h3 c8e6 a1d1 e6a2
19 +0.16 3.95M 0:08.39 e2e4 e7e5 b1c3 b8c6 g1f3 g8f6 f1c4 f8c5 e1g1 e8g8 d2d3 d7d6 f3g5 h7h6 c1e3 c5e3 f2e3
18 +0.26 2.53M 0:05.30 e2e4 e7e6 g1f3 d7d5 e4d5 e6d5 d2d4 g8f6 f1d3 f8e7 e1g1 e8g8 f1e1 b8c6 c2c3 f8e8 h2h3 e7d6 e1e8 d8e8 c1g5
18 +0.28 1.91M 0:04.07 e2e4 e7e6 g1f3 d7d5 e4d5 e6d5 d2d4 g8f6 f1d3 f8e7 e1g1 e8g8 f1e1 b8c6 c2c3 f8e8 d3f1
17 +0.38 1.50M 0:03.23 e2e4 e7e6 g1f3 d7d5 e4d5 e6d5 d2d4 g8f6 f1d3 f8e7 e1g1 e8g8 f1e1 b8c6 c2c3 a7a6 h2h3 f8e8
16 +0.38 1.28M 0:02.76 e2e4 e7e6 g1f3 d7d5 e4d5 e6d5 d2d4 g8f6 f1d3 f8e7 e1g1 e8g8 f1e1 b8c6 c2c3 a7a6 h2h3 f8e8
16 +0.26 992632 0:02.14 e2e4 e7e6 g1f3 d7d5 e4d5 e6d5 d2d4 g8f6 f1d3 f8e7 e1g1 e8g8 b1c3 b8c6 f1e1 c8g4 c1g5 g4f3 g2f3
15 +0.36 828097 0:01.80 e2e4 e7e6 g1f3 d7d5 e4d5 e6d5 d2d4 g8f6 f1d3 f8e7 e1g1 e8g8 b1c3 b8c6 f1e1 c8g4
15 +0.40 770963 0:01.69 e2e4 e7e6 g1f3 b8c6 d2d4 d7d5 e4d5 e6d5 f1b5 d8e7 b5e2 g8f6 e1g1 c6b8
14 +0.30 359950 0:00.76 e2e4 e7e6 b1c3 b8c6 d2d4 d7d5 e4d5 e6d5 f1b5 g8e7 d1e2 c8d7 g1f3 a7a6 b5c6 d7c6
13 +0.33 288411 0:00.61 e2e4 e7e6 b1c3 b8c6 d2d4 d7d5 e4d5 e6d5 f1b5 g8f6 g1f3 d8e7 d1e2 e7e2 c3e2 a7a6 b5c6 b7c6 e1g1
13 +0.34 253954 0:00.55 e2e4 e7e5 b1c3 b8c6 g1f3 g8f6 f1c4 f8b4 c3d5 f6d5 e4d5 b4a5
12 +0.24 177738 0:00.38 e2e4 e7e5 b1c3 b8c6 g1f3 g8f6 f1c4 f8b4 e1g1 e8g8 d2d3 a7a6
12 +0.24 145350 0:00.31 e2e4 e7e5 b1c3 b8c6 g1f3 g8f6 f3g5 d7d5 g2g3
11 +0.34 103620 0:00.22 e2e4 e7e6 b1c3 b8c6 d2d4 d7d5 e4d5 e6d5 f1b5 g8e7 d1e2 a7a6 b5c6 b7c6
10 +0.42 79715 0:00.17 e2e4 e7e6 d2d4 d7d5 e4d5 e6d5 g1f3 b8c6 f1b5 d8e7 d1e2 c8e6
10 +0.39 55579 0:00.12 e2e4 d7d5 e4d5 d8d5 b1c3 d5d6 g1e2 g8f6 d2d4 d6a6
9 +0.29 43806 0:00.09 e2e4 d7d5 e4d5 d8d5 b1c3 d5d6 g1e2 g8f6 d2d4 b8c6
9 +0.42 36478 0:00.08 e2e4 c7c6 d2d4 g8f6 e4e5 d8a5 b1c3 b8a6
8 +0.32 31878 0:00.07 e2e4 c7c6 d2d4 g8f6 e4e5 f6e4 b1c3 d7d5
8 +0.14 23476 0:00.05 b1c3 d7d5 e2e3 g8f6 g1f3 e7e6 d2d4
8 +0.24 17114 0:00.03 b1c3 g8f6 e2e3 d7d5 a2a3 c7c6 f1b5
7 +0.34 13273 0:00.03 b1c3 e7e6 e2e3 b8c6 g1f3 f8b4 f1b5
7 +0.32 12120 0:00.02 b1c3 d7d6 e2e3 b8d7
7 +0.22 10890 0:00.02 b1c3 d7d5 d2d4 c8g4
7 +0.14 10112 0:00.02 c2c3 e7e6 e2e3 g8f6 g1f3 b8c6 d2d4
6 +0.12 7542 0:00.01 c2c3 e7e6 g1f3 d7d5 d2d4 b8c6
6 +0.06 4710 0:00.01 b1c3 d7d5 d2d4 g8f6 e2e3 c8g4
6 +0.24 2285 0:00.00 b1c3 d7d5 e2e3 g8f6 c3b5
6 +0.34 1580 0:00.00 b1c3 d7d5 d2d4 g8f6 e2e3 e7e6
5 +0.44 1193 0:00.00 b1c3 d7d5 d2d4 c7c6 e2e3
5 +0.39 936 0:00.00 b1c3 g7g5 e2e3
4 +0.28 596 0:00.00 b1c3 d7d5 e2e4 e7e6 e4d5 e6d5
4 +0.18 339 0:00.00 d2d4 g8f6 c2c4
4 +0.31 147 0:00.00 d2d4 g8f6 e2e3 f6e4
3 +0.46 104 0:00.00 d2d4 g8f6 e2e3
3 -0.61 56 0:00.00 e2e4 g8f6 g1f3 f6e4
2 +0.35 13 0:00.00 e2e4 g8f6
1 +0.51 5 0:00.00 e2e4
Re: Senpai 2.0 -32-bit compile - Tahank you !!
Posted: Wed Nov 15, 2017 9:52 pm
WOW ! THANK YOU !
Works perfectly ! Even here, in Eastern Europe !
Re: Senpai 2.0
Posted: Fri Nov 17, 2017 9:04 am
Hi. Do not tell me where to get the sources for Linux (I use them for compiling under android)? I tried to compile from the sources that are posted here on the forum, but the engine does not work well (does not gain depth and very low speed, very poorly. Senpai-1 was going to and worked without problems). Thanks for the help.
Re: Senpai 2.0
Posted: Fri Nov 17, 2017 12:59 pm
The official source code is in the archive on Frank's site; it's compatible with Linux. Make sure to use link-time optimisation (LTO). Use Clang if possible.hagtorp wrote:Hi. Do not tell me where to get the sources for Linux (I use them for compiling under android)? I tried to compile from the sources that are posted here on the forum, but the engine does not work well (does not gain depth and very low speed, very poorly. Senpai-1 was going to and worked without problems). Thanks for the help.
Fabien.
Re: Senpai 2.0
Posted: Fri Nov 17, 2017 1:16 pm
Thanks Fabien.
Re: Senpai 2.0
Posted: Fri Nov 17, 2017 7:24 pm
Hi Tony,
Unfortunately, none your compiles, 32-bit ot 64-bit, work on my systems (of course I used your dll's) :
*old laptop, Win 7
*old biprocessor, Win XP w32 and Win XP x64
The command uci works, but the command go depth 16 (or other) leads to a crash ("Senpai 2.0 encountered a problem...").
In 2014, there was a guy here named kongsian who produced a Senpai1.0_32.exe compile, which was the only one working with my systems.
I sent him a p.m.
Unfortunately, none your compiles, 32-bit ot 64-bit, work on my systems (of course I used your dll's) :
*old laptop, Win 7
*old biprocessor, Win XP w32 and Win XP x64
The command uci works, but the command go depth 16 (or other) leads to a crash ("Senpai 2.0 encountered a problem...").
In 2014, there was a guy here named kongsian who produced a Senpai1.0_32.exe compile, which was the only one working with my systems.
I sent him a p.m.